8 800 250-3-111 многоканальный
Пн-Пт: с 9:00 до 18:00. Звонок по России бесплатный.

BL-E100/130-15/2-S1

Производитель
Wilo
Артикул
2221263
Цена по запросу

Single-stage glanded centrifugal pump in monobloc design for an installation on a base with integrated frequency converter for an electronic control for constant or variable differential pressure (Δp-c/Δp-v). The CronoBloc BL-E has been predominantly designed for pumping heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, air-conditioning and cooling systems.

Design

  • Single-stage low-pressure centrifugal pump
  • Spiral housing in monobloc design with flange and housing dimensions according to DIN EN 733, flanges PN 16 — according to EN 1092-2
  • Low-oscillation and low-noise monobloc design with lantern, foot on pump housing and rigidly connected standard motor
  • All grey cast iron components with cataphoretic coating as standard
  • Direction-of-rotation-independent bellows mechanical seal with forced flushing and cavitation-reducing impeller.
  • Mechanical seal S1 recommended for water-glycol mixtures with glycol proportions up to max. 50 % by volume and a fluid temperature of -20 °C up to max. +90 °C ... +110 °C and also if there is oil in the water-glycol mixture.

Standard equipment

Pump display for indication of:

  • Control mode Δp-c (constant differential pressure), Δp-v (variable differential pressure), PID controller, n-constant (constant speed)
  • Setpoint (e.g. differential pressure or speed)
  • Error and warning messages
  • Actual values (e.g. power consumption, actual value of the sensor)
  • Operating data (e.g. operating hours, energy consumption)
  • Status data (e.g. status of SSM and SBM relay)
  • Device data (e.g. pump name)
  • Operating mode (for Y-piece installation only: main/standby operation, parallel operation)

One-button manual operation level for:

  • Pump On/Off
  • Setpoint and speed adjustment
  • Selecting the operation and control mode
  • Configuration of operating parameters
  • Fault acknowledgement

Additional functions

  • Interfaces: Control input «Overriding Off», analogue input 0-10 V, 2-10 V, 0-20 mA, 4-20 mA for constant speed (DDC) or for remote setpoint adjustment, IR interface for wireless communication with operating and service unit Wilo-IR-Monitor/IR-Stick, plug-in slot for Wilo IF modules for connecting to building automation, configurable, potential-free fault and run signal
  • Three-phase AC motor with frequency converter
  • Integrated dual pump management
  • Integrated full motor protection (PTC thermistor sensor) with trip electronics
  • Standard condensate drainage holes in the motor housing (closed upon delivery)
  • Different operating modes for heating (HV) or air-conditioning (AC) applications
  • Access disable on the pump
  • Different operation levels: Standard/Service

Accessories

  • Supporting blocks for fixing to the base
  • IR-Monitor
  • IR-Stick
  • IF module PLR
  • IF module LON
  • IF module Modbus
  • IF module BACnet
  • IF module CAN
  • Control systems VR-HVAC/CCe-HVAC/SCe-HVAC
  • Differential pressure sensor (DDG) sets 0-10 V for pumps in version ...-R1
Packaging
Pieces per pallet
Packaging type
Euro pallet 
Packaging property
Transport packaging 
Number per layer
Hydraulic data
Min. fluid temperature
-20 °C
Min. ambient temperature
0 °C
Maximum operating pressure
16 bar
Minimum efficiency index (MEI)
0.4 
Max. ambient temperature
40 °C
Max. fluid temperature
140 °C
Drive
Insulation class
Mains connection
3~380 V, 50/60 Hz 
Interference immunity
EN 61800-3 
Power consumption
17100 W
Motor protection
PTC integrated 
Rated power
15 kW 
Interference emission
EN 61800-3 
Protection class motor
IP55 
Max current
27.2 A
Motor efficiency class
IE4 
Dimension, weight
Net weight, approx.
204 kg
Length with packaging
1200 mm
Width
395 mm
Height with packaging
764.5 mm
Gross weight, approx.
229 kg
Width with packaging
800 mm
Height
621 mm
Length
886 mm
Installation dimensions
Pipe connection on the suction side
DN 125 
Pipe connection on the discharge side
DN 100 
Product data
Date of sales availability
2023-04-01 
Product description
BL-E100/130-15/2-S1 
Article number
2221263 
EAN number
4062679237763 
Brand
Wilo 
Colour
Green 
Minimum order quantity
Materials
Shaft
Stainless steel 
Pump housing
5.1301/EN-GJL-250 KTL-coated 
Impeller
Grey cast iron 
Shaft seal
Q1Q1X4GG 
Approved liquids (other liquids upon request)
Heat carrier oil
Special version at additional charge 
Cooling and cold water circulation systems
Yes 
Heating water (as per VDI 2035)
Yes 
Артикул Название Цена
2221175 BL-E32/240-15/2-S1 Цена по запросу
2221176 BL-E32/240-15/2-R1 Цена по запросу
2221177 BL-E32/240-15/2-R1-S1 Цена по запросу
2221178 BL-E32/230-11/2 Цена по запросу
2221179 BL-E32/230-11/2-S1 Цена по запросу
2221180 BL-E32/230-11/2-R1 Цена по запросу
2221181 BL-E32/230-11/2-R1-S1 Цена по запросу
2221182 BL-E40/200-15/2 Цена по запросу
2221183 BL-E40/200-15/2-S1 Цена по запросу
2221184 BL-E40/200-15/2-R1 Цена по запросу
2221185 BL-E40/200-15/2-R1-S1 Цена по запросу
2221186 BL-E40/190-11/2 Цена по запросу
2221187 BL-E40/190-11/2-S1 Цена по запросу
2221188 BL-E40/190-11/2-R1 Цена по запросу
2221189 BL-E40/190-11/2-R1-S1 Цена по запросу
2221190 BL-E 40/245-22/2 Цена по запросу
2221191 BL-E 40/245-22/2-S1 Цена по запросу
2221192 BL-E 40/245-22/2-R1 Цена по запросу
2221193 BL-E 40/245-22/2-R1-S1 Цена по запросу
2221194 BL-E 40/235-18,5/2 Цена по запросу
2221195 BL-E 40/235-18,5/2-S1 Цена по запросу
2221196 BL-E 40/235-18,5/2-R1 Цена по запросу
2221197 BL-E 40/235-18,5/2-R1-S1 Цена по запросу
2221198 BL-E50/160-11/2 Цена по запросу
2221199 BL-E50/160-11/2-S1 Цена по запросу