Wilo-DrainLift SANI CUT-M
Легкая однонасосная установка водоотведения с режущим механизмом для частных домов. Однонасосная установка Wilo-DrainLift SANI CUT-M — это компактная, легкая установка водоотведения согласно EN 12050-1, и поэтому идеально подходит для применения в жилых зданиях: как в одноквартирных, так и в многоквартирных домах. Благодаря большому объему включения и режущему механизму с эффектом двойного реза установка Wilo-DrainLift SANI CUT-M обеспечивает высокую надежность эксплуатации. Благодаря свободно выбираемым впускным отверстиям и компактным размерам установка Wilo-DrainLift SANI CUT-M может быть установлена легко и не бросается в глаза. Удобная конструкция с прозрачной крышкой максимально облегчает обслуживание. Рекомендуемые сервисные услуги Ввод в эксплуатацию Wilo-Live Assistant Техническое обслуживание
| Артикул | Наименование | Цена | ||
|---|---|---|---|---|
| 6095520 | DrainLift SANI CUT-M.20M/1 | Цена по запросу | ||
| 6095521 | DrainLift SANI CUT-M.20T/1 | Цена по запросу | ||
| 6095522 | DrainLift SANI CUT-M.27M/1 | Цена по запросу | ||
| 6095523 | DrainLift SANI CUT-M.27T/1 | Цена по запросу | ||
| 6095524 | DrainLift SANI CUT-M.30M/1 | Цена по запросу | ||
| 6095525 | DrainLift SANI CUT-M.30T/1 | Цена по запросу | ||
| 6095526 | DrainLift SANI CUT-M.42T/1 | Цена по запросу | ||
Тип
Ready for connection and fully submersible single-pump lifting unit with macerator hydraulics for pumping sewage containing faeces.
Применение
Pumping of sewage containing faeces:
- In cases where sewage cannot be discharged directly into the sewer system via a natural downward slope
- For backflow resistant drainage in cases where the discharge point is below the backflow level
Оснащение/функция
- Switchgear with mains-independent alarm and collective fault signal
- Ready-to-plug
- Tank with inspection opening and transparent cover
- Analogue level measurement (4 ... 20 mA)
- Non-return valve
- Thermal motor monitoring with bimetallic sensor
Расшифровка наименования
Example: |
DrainLift SANI-CUT M.13M/1 |
DrainLift |
Product family |
SANI CUT |
Sewage lifting unit wit macerator |
M |
Size |
13 |
Max. delivery head |
M |
Mains connection:
|
1 |
Version for motor and switchgear:
|
Технические характеристики
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Operating mode: S3 10%
- Fluid temperature: 3 ... 40 °C (37 ... 104 °F), max. 65 °C (149 °F) for 5 min
- Max. ambient temperature: 3 ... 40 °C (37 ... 104 °F)
- Tank volume: 64 l (16 US.liq.gal.)
- Max. usable volume in the tank according to the inlet height*: 29 l/7 US.liq.gal. (180 mm*)
- Discharge port: DN 32, PN 6
- Inlet connection: DN 100/150 (110/160 mm)
- Ventilation connection: DN 65 (75 mm)
- Switchgear degree of protection: IP54
- Noise level: 70 dB(A)
Материалы
- Motor housing: 1.4404 (AISI 316L)
- Hydraulics: EN-GJL-250 (ASTM A48 Class 35/40B)
- Impeller: EN-GJL-250 (ASTM A48 Class 35/40B)
- Macerator: 1.4528/59 HRC (AISI 440B+Co)
- Tank: PE
- Non-return valve: EN-GJL-250 (ASTM A48 Class 35/40B)
Тип
Gas- and watertight collection tank with sloped floor at an angle and an inspection opening with transparent cover.
Freely selectable inlets.
Level measurement performed with an analogue output signal 4 ... 20 mA.
Discharge port with non-return valve attached.
Surface-cooled (air) or self-cooling (sheath flow cooling) motor with thermal motor monitoring.
Pre-installed switchgears for automatic operation:
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
Комплект поставки
- Lifting unit with macerator, switchgear, and connection cable including plug
- Pipe connection DN 32 (outer diameter 40 mm)
- HT double socket DN 65 (75 mm) for ventilation connection
- HT double socket DN 50 (63 mm) for drain connection
- Inlet set with hole saw 124 mm (5 in) and gasket DN 100 (110 mm)
- Ground fixing kit
- Noise insulation mat
- 9 V rechargeable battery
- Installation and operating instructions
Расшифровка наименования
Example: |
DrainLift SANI-CUT M.13M/1 |
DrainLift |
Product family |
SANI CUT |
Sewage lifting unit wit macerator |
M |
Size |
13 |
Max. delivery head |
M |
Mains connection:
|
1 |
Version for motor and switchgear:
|
Технические характеристики
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Operating mode: S3 10%
- Fluid temperature: 3 ... 40 °C (37 ... 104 °F), max. 65 °C (149 °F) for 5 min
- Max. ambient temperature: 3 ... 40 °C (37 ... 104 °F)
- Tank volume: 64 l (16 US.liq.gal.)
- Max. usable volume in the tank according to the inlet height*: 29 l/7 US.liq.gal. (180 mm*)
- Discharge port: DN 32, PN 6
- Inlet connection: DN 100/150 (110/160 mm)
- Ventilation connection: DN 65 (75 mm)
- Switchgear degree of protection: IP54
- Noise level: 70 dB(A)
Материалы
- Motor housing: 1.4404 (AISI 316L)
- Hydraulics: EN-GJL-250 (ASTM A48 Class 35/40B)
- Impeller: EN-GJL-250 (ASTM A48 Class 35/40B)
- Macerator: 1.4528/59 HRC (AISI 440B+Co)
- Tank: PE
- Non-return valve: EN-GJL-250 (ASTM A48 Class 35/40B)
Тип
Gas- and watertight collection tank with sloped floor at an angle and an inspection opening with transparent cover.
Freely selectable inlets.
Level measurement performed with an analogue output signal 4 ... 20 mA.
Discharge port with non-return valve attached.
Surface-cooled (air) or self-cooling (sheath flow cooling) motor with thermal motor monitoring.
Pre-installed switchgears for automatic operation:
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
Комплект поставки
- Lifting unit with macerator, switchgear, and connection cable including plug
- Pipe connection DN 32 (outer diameter 40 mm)
- HT double socket DN 65 (75 mm) for ventilation connection
- HT double socket DN 50 (63 mm) for drain connection
- Inlet set with hole saw 124 mm (5 in) and gasket DN 100 (110 mm)
- Ground fixing kit
- Noise insulation mat
- 9 V rechargeable battery
- Installation and operating instructions