Wilo-Sub TWI 5-SE Plug & Pump
Your advantages Easy installation and commissioning thanks to ready-to-plug delivery including all accessories Thermal motor protection Pump (housing, stages, impellers) made entirely of stainless steel 1.4301 (AISI 304) The self-cooling motor also enables the provision outside the water Recommended services Wilo-Live Assistant
| Артикул | Наименование | Цена |
|---|
Design
Water-supply system with submersible pump, control and complete accessories
Application
- Pumping from wells, rainwater storage tanks and vessels
- Irrigation, sprinkling or pumping out
- Water supply
- Rainwater utilisation
Equipment/function
- Submersible pump
- Mains connection 1~230 V, 50 Hz
- Connection cable
- Thermal motor protection switch
Typekey
Example: |
TWI5-SE 304 EM-FS P&P |
TWI |
Submersible pump made of stainless steel |
5 |
Pump diameter (5″) |
[Space] |
Suction through strainer |
SE |
Connection G 11/4 on suction side (for floating extractor) |
3 |
Nominal flow rate Q in m³/h (at optimum efficiency) |
04 |
Number of steps |
EM |
Single-phase current, 1~230 V, 50 Hz |
DM |
Three-phase current, 3~400 V, 50 Hz |
[Space] |
no float switch |
P&P |
Plug & Pump version |
Technical data
- Mains connection 1~230 V, 50 Hz
- Fluid temperature +5 °C to +35 °C
- Max. operating pressure 10 bar
- Protection class: IP 68
- Suction- and pressure-side connection Rp 1
Materials
- Pump housing stainless steel 1.4301
- Impeller made of Noryl
- Shaft made of 1.4005 stainless steel
- Mechanical seal made of carbon/ceramic
- Stage chambers made of Noryl
- Seal made of NBR
Scope of delivery
- Pump
- Complete control system
- Safety cable made of polypropylene
- Fine suction filter
- Suction hose
- Installation and operating instructions
Accessories
- Gate valve
- Non-return valve
- Switchgear and motor protection
- Protection switch
- Float switch
- Acoustic overflow alarm
- Pressure controller
- Suction filter with floater:
- Coarse filter
- Fine filter
Typekey
Example: |
TWI5-SE 304 EM-FS P&P |
TWI |
Submersible pump made of stainless steel |
5 |
Pump diameter (5″) |
[Space] |
Suction through strainer |
SE |
Connection G 11/4 on suction side (for floating extractor) |
3 |
Nominal flow rate Q in m³/h (at optimum efficiency) |
04 |
Number of steps |
EM |
Single-phase current, 1~230 V, 50 Hz |
DM |
Three-phase current, 3~400 V, 50 Hz |
[Space] |
no float switch |
P&P |
Plug & Pump version |
Technical data
- Mains connection 1~230 V, 50 Hz
- Fluid temperature +5 °C to +35 °C
- Max. operating pressure 10 bar
- Protection class: IP 68
- Suction- and pressure-side connection Rp 1
Materials
- Pump housing stainless steel 1.4301
- Impeller made of Noryl
- Shaft made of 1.4005 stainless steel
- Mechanical seal made of carbon/ceramic
- Stage chambers made of Noryl
- Seal made of NBR
Scope of delivery
- Pump
- Complete control system
- Safety cable made of polypropylene
- Fine suction filter
- Suction hose
- Installation and operating instructions
Accessories
- Gate valve
- Non-return valve
- Switchgear and motor protection
- Protection switch
- Float switch
- Acoustic overflow alarm
- Pressure controller
- Suction filter with floater:
- Coarse filter
- Fine filter