COR-3 MHIE 205/MS

Compact pressure boosting system according to DIN 1988 and DIN EN 806, for direct or indirect connection. Consisting of non self-priming, horizontal stainless steel high-pressure multistage centrifugal pumps switched in parallel with integrated frequency converters. Ready for connection with stainless steel pipework, mounted on a base frame, including control device with all necessary measurement and adjustment equipment.

For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems.

For pumping drinking water, process water, cooling water or other service water, which does not affect the materials used, neither chemically nor mechanically, and does not contain any abrasive or long-fibre constituents.

Special features/product benefits

• Easy installation thanks to compact system with two or three multistage horizontal MHIE pumps with integrated air-cooled frequency converter

• High operational reliability thanks to full motor protection with PTC thermistor sensor and automatic dry-running detection

• Drinking water approval (ACS) for pumps with components made of stainless steel that come into contact with the fluid

• High operational reliability thanks to master/slave function

Equipment/function

• 2 — 3 MHIE pumps per system

• Continuous control mode by use of pumps with integrated frequency converters

• Master/slave printed circuit board in single pump frequency converter

• Components that come in contact with the fluid are corrosion-resistant

• Galvanised base frame with height-adjustable vibration absorbers for insulation against structure-borne noise

• Stop valve on every pump on the suction and pressure sides

• Non-return valve, on the pressure side

• Diaphragm pressure vessel 8 l, PN 10, on the pressure side

• Pressure sensor, on the discharge side

• Manometer optional, on the suction side

• Manometer, on the discharge side

• Low-water cut-out switchgear, optional

• Switchgear with IP54 plastic housing

Recommended accessories (to be ordered separately)

• WMS low-water cut-out switchgear set, optional

• Flexible connection pipes or compensators

• Break tank for system separation

• Diaphragm pressure vessel

• Threaded caps for systems with thread manifold